Scanning Regular, Non-Damaged Photos (2) - Microtek ScanMaker i700 Supplementary Manual

This scenario makes use of the Advanced Control Panel.
1. Raise the scanner lid, and place the photo to be scanned face down on the
2. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the
3. Click the Switch icon (
4. Click the Overview button to perform a preliminary view of the entire image. When
5. In the preview window, you can resize the scan frame (floating dotted line) around
6. Specify your scanning requirements in the Settings window.
7. If necessary, adjust image quality using the image corrections tools (White/Black
8. If the colors in your photo are faded and need restoring, check the "Automatic
9. Click the Scan to button to scan the image.
10 ScanMaker i700 Supplement

Scanning Regular, Non-Damaged Photos (2)

scanner glass surface. Position the top end of the photo towards the back of the
scanner. Make sure the Black Mat is attached on the scanner lid, then close the
scanner lid.
ScanWizard 5 Standard Control Panel.
When ScanWizard 5 launches, it automatically performs a fast preview of the
material on your scanner glass surface and displays it in the preview area.
switch to the Advanced Control Panel.
done, you will see an image appear in the preview window.
the image by dragging on the edge or corner of the scan frame to determine the
final size of the actual scan.
Points, Tone Curve, Brightness/Contrast, Color Correction, Filter, and Descreen).
Color Restoration" box in the Settings window.
Depending on your selection, the scanned and processed image can be saved to
a file, opened in an image-editing program, sent to a printer, attached in an e-mail,
or uploaded to a website.
) on the right corner of the Standard Control Panel to