Scanning 6 X 17 Cm (120) Panoramic Film - Microtek ScanMaker i700 Supplementary Manual

C. Scanning 6 x 17 cm (120) Panoramic Film
To scan 6 x 17 cm (120) Panoramic Film, use the EZ-Lock 6 x 17 cm (120) Panoramic
Film Holder which can hold 1 piece of 120 panoramic film or a variety of variously-
sized film, such as 4 pieces of 6 x 4.5 cm film, or 2 pieces each of 6 x 6 cm film, 6 x 7 cm
film, and 6 x 9 cm film.
1. Load the film face down inside the holder.
2. Raise the scanner lid, then place the holder with the loaded film on the scan bed.
To make sure the auto
multiframe cropping
feature performs
correctly, align the
holder's front edges
flush against the top
ruler of the scanner.
3. Follow the procedures (steps 3 through 10) for scanning 35mm filmstrips to carry
22 ScanMaker i700 Supplement
a) Push on the side to open the lid.
b) Place the film face down into the holder.
c) Pull down the side to close the lid.
out scanning.
The calibration window on the
glass surface should be kept
clear and free from any
obstruction during scanning.