When I chose Auto Crop under the MSC utility, the scanner was unable to recognize or detect my scan material.
When I chose Auto Crop under the MSC utility, the
scanner was unable to recognize or detect my scan
material.
Instead of using than using the "Auto Crop" function under the Scan Frame
category, you can select Fixed Frame instead, and choose the closest size
that matches your scan material from the Fixed frame options. If you
cannot find anything from the list of options, Microtek recommends that
you close the MSC utility and launch ScanWizard 5.
file:///D|/msc/qa_Auto_Crop_.htm [8/15/03 3:39:14 PM]