Cancel Button - Microtek ScanMaker 4700 User Manual

Customizing the Copy panel
Thumbnail of the Scan frame: Shows the selected scan frame. If Auto
Crop is selected, the selected scan frame of the thumbnail is disabled.
Copy Quality
Selects your printout quality. The higher the image quality, the longer the
scanning time and the greater disk space required. Microtek recommends
that you choose "Normal" quality for 150 dpi printing, "Best" for 600 or 300
dpi printing, and "Draft" for 100 dpi printing.
Scaling
Enlarges or reduces an image. Specifying scaling parameters above 100%
will enlarge the scanned image, while specifying scaling parameters below
100% will reduce the scanned image. Scaling range is between 25% and
400%.
Copies
Defines the number of printout (1 to 99) copies required for a current scan
job. This setting can be superseded by the setting in your Printer Setup
dialog box if you have checked the check box on "Show printer setting
dialog box before scan."
Show printer setting dialog box before scan
Check this option if you want to display the printer dialog box before you
start to print. The number of printout copies may be redefined in this dialog
box. Uncheck this option if you do not want to bring up the printer dialog
box and make printout quantity based on the "Copies" setting.
OK button
Confirms and saves the parameters currently specified for the Copy Smart-
Touch button on your scanner. The next time you press the Copy button,
the defined and saved settings are retrieved as your current settings.

Cancel button

file:///D|/msc/panel_Copy.htm (3 of 4) [8/15/03 3:15:52 PM]