Microtek ScanMaker 4700 User Manual page 30

Power saving page
Cancel button
Reset button
Help (?) button
Lamp Current Status
When you select the Power Saving function as your scanner's Custom
button function, press the Custom button for the scanner and the TMA to
switch over to "lamp sleep" mode. The scanner lamp or TMA lamp (e.g.,
Light Plate, TMA, LL35) can then be turned Off or On, or both Off. The
lamp status info reflects current power saving mode.
Note: When the lamp current status is "Off," performing a scan will
change the lamp status to "On."
OK button
Confirms and saves the parameters currently specified for the Custom
Smart-Touch button on your scanner. The next time you press the Custom
button, the defined and saved settings are retrieved as your current
settings.
Cancel button
Abandons the parameters you have just made under the Custom tab
panels; all the parameters are restored to their previous settings.
Reset button
Clears all the parameters you have just made under the Custom tab panel;
all the parameters are reset to their default settings.
Help (?) button
Provides answers to any queries regarding the MSC utility and scanner
button functions. Simply click the Help (?) button located at the bottom
left corner of the MSC panel. To search for a topic, click the Index tab,
file:///D|/msc/Power_saving_page.htm (2 of 3) [8/15/03 3:19:22 PM]