Custom Button - Microtek ScanMaker 4700 User Manual

Custom button

Custom button
When you press the Custom button on your scanner, your scanner starts
to perform the function that was previously defined in the Custom Panel of
the MSC utility.
Power Saving function button
Press the Custom button on your scanner. This will change the lamp
current status. The lamp current status can be checked by choosing the
"Power Saving" function under "Custom" in the MSC utility.
Scan function button
Press the Custom button on your scanner. This will automatically scan and
save your image, based on the "Scan" function settings under "Custom" in
the MSC utility.
To customize the parameters for the Custom button - Scan function,
specify your "Scan" function settings under "Custom" in the MSC utility.
Launch Application function button
Press the Custom button on your scanner. This will automatically launch an
installed application, based on the
under "Custom" in the MSC utility.
To customize the parameters for the Custom button - Launch Application
function, specify your "Launch Application" function settings under
"Custom" in the MSC utility.
file:///D|/msc/Custom_button.htm [8/15/03 3:28:06 PM]
"Launch Application" function settings