Operating Your Scanner; Led Indicator - Microtek ArtixScan 6000XY Operation Manual

5 Operating your scanner

This section discusses three sections:
• Scanner Panel
• Power up sequence
• Placing originals in your scanner
Scanner Panel
The Scanner Panel, located at the upper right corner, is used for power up. The panel
has a push button (with LED indicator) and one LED indicator.
LED indicator information:
Power Push Button
This push button shows power status.
On (Green light)
Off
When the push button is pressed, the scanner carriage starts to travel to the scanning
lamp replacement position.

LED Indicator

This LED indicates the status of the scanner.
Green
Blinking Green
Red
Off
Power is on.
Power is off.
Scanner is ready for operation.
Scanner is busy or during self-test
Scanner malfunction
Indicates the TMA is not closed, or the
scanner carriage for the reflective
materials is not in position.
ArtixScan 6000XY Installation and Operation Manual 11