System Menu - Microtek ArtixScan 2500 User Manual

B. System Menu
The System Menu displays current scanner information,
lets you view the SCSI chain status, and lets you view
the About dialog box of the Scanner ICC Profiler
program.
1. Get Current Scanner Info: This command provides
information on the current scanner. A dialog box
appears showing the scanner model in use, the SCSI
ID number of the scanner, and the firmware version
of the scanner.
2. Scanner Probe: This command displays the SCSI
devices on the SCSI chain, as well as the SCSI ID
numbers of the individual devices.
32 ArtixScan 2500 Installation and Operation Manual
To use this command:
a) Choose the Get SCSI Chain Info command.
b) If your scanner does not show in the list, make
sure it is connected and turned on, then click on
the Probe button in the dialog box.
• Choose the correct interface card in the card
selection box.
• Check the numbered box corresponding to the
SCSI ID of your scanner. Click OK to close the
dialog box.
3. About: This command displays the splash screen of
the Scanner ICC Profiler program, including the
product logo and the software version number.