Using The Universal Glass Film Holder - Microtek ArtixScan 2500 User Manual

A. Using the Universal Glass Film Holder
1. To scan non-standard-sized transparent film, place
the film face down on top of the glass surface of the
Universal Glass Film Holder.
Scanning in high resolution: Place the film face down
on the glass surface in the area of the holder labeled
"HIGH RESOLUTION". High-resolution scanning is
at 2,500 dpi.
HIGH RESOLUTION SCAN AREA
20 ArtixScan 2500 Installation and Operation Manual
2. Place the vinyl strip on the edge of the transparency
to secure the transparency.
3. Pull the transparency tray out slightly, then place the
Universal Glass Film Holder into the transparency
tray. Make sure the holder is seated firmly in the
transparency tray.
4. Gently push the transparency tray back in.