Using The 4" X 5" Batch Film Holder - Microtek ArtixScan 2020 User Manual

Microtek artixscan 2020: users manual

Hide thumbs Also See for ArtixScan 2020:

Table of Contents

5) Using the 4" x 5" batch film holder

1. Insert the films to be scanned into the 4" x 5"

batch film holder.

a) Push to open the holder.

b) Place the films in the holder.

c) Pull to close the holder.

For high-resolution scanning

the holder in the area that labeled "HIGH

RESOLUTION" on the holder.

2. Pull the transparency tray out a little, then

place the 4" x 5" batch film holder into the

transparency tray.

Note: Push the holder back to place, make sure it is

firmly seated in the transparency tray.

3. Gently push the transparency tray back in.

: Insert the films into

Table of Contents

Do you have a question about the ArtixScan 2020 and is the answer not in the manual?