Troubleshooting Guide - KUHN EL82 Operator's Manual


Problem
Noisy drive when lifting the
machine.
Noisy drive during work.
Excessive power
requirement. (Very wet working
conditions).
Important ground projections to
the rear.
Excessive power
requirement. (Dry working
conditions).
Tilth is too coarse.

$Troubleshooting guide


Cause
Top link of 3-point hitch badly
positioned/adjusted.
Excessive lifting height.
Machine tilted to the front or rear
(excessive pitch angle).
Insufficient machine side to side
stabilization.
Working depth too deep.
Excessively worn tools.
Incorrect hood positioning.
Working depth too deep.
Incorrect hood positioning.
Excessive ground speed.
Power tiller

Remedy
Position top link parallel to the
lower links.
Limit the lift linkage stroke.
Lengthen or shorten top link to
set the machine horizontally
during work.
Adjust stabilizers of lower links to
prevent machine side to side or
up and down movements.
Set and control the working
depth.
Replace the whole set of tools to
ensure rotor balance.
Adjust hood position.
- 1 Hood:
• Models 130 - 155 - 180
- 2 Hoods:
• Model 205.
Set and control the working
depth.
Adjust hood position.
- 1 Hood:
• Models 130 - 155 - 180
- 2 Hoods:
• Model 205.
Reduce ground speed.
Troubleshooting guide
EL82
59