Related Manuals for KUHN GF 4201 MH
Summary of Contents for KUHN GF 4201 MH
- Page 1 ASSEMBLY / OPERATORS MANUAL GF 4201 MH - GYROTEDDER PLEASE READ CAREFULLY BEFORE USING THE MACHINE N° 95203 B.GB - 03.2000...
-
Page 2: Dear Owner
DEAR OWNER, In buying a KUHN machine you have chosen wisely. Into it have gone years of thought, research and improvements. You will find, as have thousands of owners all over the world, that you have the best that engineering skill and actual field testing can produce. You have purchased a dependable machine, but only by proper care and operation can you expect to receive the performance and long service built into it. - Page 3 CONTENTS Page...
-
Page 4: Safety Advice
SAFETY ADVICE DESIGNATED USE OF THE MACHINE GF 4201 MH GF 4201 MH... -
Page 5: General Safety Recommendations
GENERAL SAFETY RECOMMENDATIONS BASIC PRINCIPLES... - Page 6 ATTACHMENT POWER TAKE-OFF...
- Page 7 (rotational frequency) Rotational frequency Rotational frequency 540 min...
-
Page 8: Hydraulic System
HYDRAULIC SYSTEM TIRES... -
Page 9: Maintenance
MAINTENANCE... - Page 10 SPECIAL SAFETY RECOMMENDATIONS...
-
Page 11: Safety Decals
SAFETY DECALS... -
Page 13: Technical Specifications
TECHNICAL SPECIFICATIONS... - Page 14 ASSEMBLY INSTRUCTIONS 1) Frame assembly (photos 1 and 1 A) 2) Fitting the 3-point frame (fig 2) 3) Fitting the stand (photo 3)
- Page 15 4) Fitting reflectors (fig. 4) 5) Fitting frame shield (photo 5) 6) Fitting the wheels (photo 6)
- Page 16 7) Fitting tines and tine arms (fig. 7 and 8) Before fitting tine arms and tines fold the intermediate and the outer rotors in working position. During the first hours of work, make frequent checks of tine nut and bolt tightness. If necessary, retighten to 16 daNm (118 ft.lbs) to avoid the possibility of loss or breakage (item A, fig.
- Page 17 8) Fitting control cords (photo 9)
- Page 18 9) Fitting the safety guards (photos 10 and 10 A) 5 daNm / 37 ft.lbs 9 daNm / 65 ft.lbs 1010 1010A...
-
Page 19: Fitting To The Tractor
ATTACHMENT FITTING TO THE TRACTOR GF 4201 MH... -
Page 20: Pto Shaft
PTO SHAFT to the 540 rpm (min ) tractor drive These recommendations and adjustments must be respected to avoid damage or premature wear of the PTO. Never connect the PTO to the 1000 rpm (min ) tractor drive . To avoid accidents which could be serious, make sure that the guards are always correctly in place and secured with the safety chains (photo 11). -
Page 21: Working Position And Adjustments
WORKING POSITION AND ADJUSTMENTS... - Page 22 4201 MH...
-
Page 23: Operating Speed
OPERATING SPEED First time over Second time over (rotational frequency) -
Page 24: Transport Position
TRANSPORT POSITION... -
Page 25: Parking The Machine
PARKING THE MACHINE GF 4201 MH... - Page 26 LUBRICATION Grease the following with SHELL Multi-Purpose grease NLGI grade 2 : Once a day Once a week Once a year Lubricate the following points with SHELL OIL : Once a week TO ENSURE TROUBLE FREE OPERATION OF YOUR MACHINE, WE RECOMMEND SHELL LUBRICANTS...
-
Page 27: Optional Equipment
OPTIONAL EQUIPMENT 1) 3-POINT FRAME EXTENSION (Kit No 114 6230) (photo 26) 2) DUPLEX REDUCTION GEARBOX (KIT No 111 6440) GF 4201 MH (rotational frequency) (rotational frequency) GF 4201 MH (rotational frequency) (min... - Page 28 3) WHEEL / CROP DEFLECTORS (KIT No 111 6830) 4) SIGNALLING ELEMENTS (KIT No. 111 6670)
- Page 29 5) DAMPER EQUIPMENT (Kit No. 112 6270)
-
Page 30: Sound Levels
SOUND LEVELS Sound levels given out by : GF 4201 MH Gyrotedder Sound levels have been measured in accordance with the measuring methods as defined in : HM Agricultural Inspectorate AGRICULTURAL MACHINERY NOISE Legislation and guidance on methods of testing... -
Page 31: Limited Warranty
LIMITED WARRANTY KUHN S.A. THESE CONDITIONS ARE SUBJECT TO THE FOLLOWING EXCEPTIONS : THE CUSTOMER WILL BE RESPONSIBLE FOR AND BEAR THE COSTS OF:... - Page 32 LIMITED WARRANTY IS DEPENDENT UPON THE STRICT OBSERVANCE BY THE PURCHASER OF THE FOLLOWING PROVISIONS : DISCLAIMER OF FURTHER WARRANTY There are no warranties, expressed or implied, except as set forth above. There is no warranty of merchantability. There are no warranties which extend beyond the description of the product contained herein.
- Page 33 - N O T E S -...
- Page 35 This machine complies with the safety requirements of the European machinery directive. The Operator should respect all Health and Safety regulations as well as the Highway Code. For your own safety, use only genuine KUHN spare parts. The manufacturer disclaims all responsibilities due to incorrect use or non-compliance with the...
- Page 36 KUHN parts KUHN S.A. 4 Impasse des Fabriques F - 67706 SAVERNE CEDEX Tél. : + 33 (0) 3 88 01 81 00 - Fax : + 33 (0) 3 88 01 81 03 www.kuhnsa.com - E-mail : info@kuhnsa.com...