Specifications - Stihl HSE 42 Instruction Manual

English
1 Power cord
2 Strain relief (cord retainer)
3 Lock for strain relief
4 Trigger
5 Trigger switch lockout
6 Switch lever
7 Loop handle
8 Hand guard
9 Cutting blades (HSE 42) – see "Specifica‐
tions"
10 Cutting blades (HSE 52) – see "Specifica‐
tions"
11 Blade scabbard
12 Blunt projection (integral cutter guard)
13 Tip guard (HSE 52 only)
# Serial number

12 Specifications

12.1 Engine
12.1.1 HSE 42
Rated voltage:
Rated current:
Frequency:
Power consumption:
Protect with a fuse:
Protection class:
12.1.2 HSE 52
Rated voltage:
Rated current:
Frequency:
Power consumption:
Protect with a fuse:
Protection class:
12.2 Cutting blades
12.2.1 HSE 42
Sharpening angle to horizontal: 36°
Tooth spacing:
Stroke rate:
Blade length:
12.2.2 HSE 52
Sharpening angle to horizontal: 32°
Tooth spacing:
Stroke rate:
Blade length:
12.3 Weight
Without connecting cable:
HSE 42:
26
HSE 52:
12.4
Sound and vibration levels are determined on
the basis of the operating status at nominal maxi‐
mum speed.
For further details concerning compliance with
the Directive for Employers on Vibration 2002/44/
EEC, see www.stihl.com/vib/
12.4.1
HSE 42:
HSE 52:
12.4.2
HSE 42:
HSE 52:
12.4.3
HSE 42:
HSE 52:
220 - 240 V
The K‑factor in accordance with Directive
1.9 A
2006/42/EC is 2.0 dB(A) for the sound pressure
50 - 60 Hz
420 W
level and sound power level; the K‑factor in
min. 10 A
accordance with Directive 2006/42/EC is
II, E
2.0 m/s
The vibration values quoted above have been
220 - 240 V
measured according to a standardized test pro‐
2.1 A
cedure and may be used to compare electric
50 - 60 Hz
power tools.
460 W
min. 10 A
Depending on the type of usage, the vibrations
II, E
that actually occur may differ from the values
quoted.
The vibration values quoted may be used for an
initial assessment of the user's exposure to
vibrations.
21 mm
The actual exposure to vibrations has to be eval‐
3400 rpm
450 mm
uated. This process may also take into account
times during which the electric power tool is
switched off and times during which it is switched
on but running without load.
23 mm
3400 rpm
12.5
500 mm
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorization and
Restriction of Chemical substances.
3.0 kg
Sound and Vibration Values
Sound pressure level L
DIN EN 62841-4-2
Sound power level L
DIN EN 62841-4-2
Vibration measurement a
to DIN EN 62841-4-2
Handle, left
2
3.1 m/s
2
3.1 m/s
2
for the vibration level.
REACH
12 Specifications
3.1 kg
according to
p
87 dB(A)
87 dB(A)
according to
w
95 dB(A)
95 dB(A)
according
hv
Handle,
right
2
1.5 m/s
2
1.5 m/s
0458-762-9621-C