Stihl HSE 42 Instruction Manual page 28

English
16 UKCA Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
Designation:
Make:
Series:
Serial identification number: 4818
conforms to the relevant provisions of UK regula‐
tions The Restriction of the Use of Certain Haz‐
ardous Substances in Electrical and Electronic
Equipment Regulations 2012, Supply of Machi‐
nery (Safety) Regulations 2008, Electromagnetic
Compatibility Regulations 2016 and Noise Emis‐
sion in the Environment by Equipment for use
Outdoors Regulations 2001 and has been manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion:
EN 55014‑1, EN 55014‑2, EN 62841-1,
EN 62841-4-2, EN 61000‑3‑2, EN 61000‑3‑3
The measured and the guaranteed sound power
level have been determined in accordance with
UK regulation Noise Emission in the Environ‐
ment by Equipment for use Outdoors Regula‐
tions 2001, Anhang 8, using the ISO 11094
standard.
Measured sound power level
HSE 42:
HSE 52:
Guaranteed sound power level
HSE 42:
HSE 52:
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of construction, the country of manufac‐
ture and the machine number are shown on the
machine.
Waiblingen, 2022-08-01
ANDREAS STIHL AG & Co. KG
28
Electric hedge trim‐
mer
STIHL
HSE 42
HSE 52
95 dB(A)
95 dB(A)
97 dB(A)
97 dB(A)
16 UKCA Declaration of Conformity
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
17 General Power Tool Safety
Warnings
17.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 (EN 62841) standard for electric
motor-operated hand-held tools.
STIHL is required to reproduce the wording.
The safety advice described under "Electrical
Safety" for avoiding electric shock does not apply
to STIHL cordless products.
WARNING
Read all the safety precautions, instructions,
illustrations and specifications accompanying this
electric power tool. Failure to follow the safety
warnings and instructions may result in electric
shock, fire and/or serious injury. Keep all safety
warnings and instructions for future reference.
The term "electric power tool" used in the safety
advice refers to electric power tools powered by
mains electricity (by means of a power cord) or
electric power tools powered by rechargeable
batteries (without a power cord).
17.2 Work area safety
a) Keep your work area clean and well lit. Clut‐
tered or dark areas invite accidents.
b) Do not work with the electric power tool in
potentially explosive environments in which
there are inflammable liquids, gases or
dusts. Electric power tools create sparks,
which can ignite dusts or fumes.
c) Keep children and other people away while
you are operating the electric power tool.
0458-762-9621-C