Table of Contents
Advertisement
Lifting the Machine
Lifting the Machine with a Forklift
Ensure that the hopper is empty before lifting the machine.
1. Place the platform in the raised position.
2. Lift the machine using the side or rear pockets.
Lifting the Machine with a Hoist
Ensure that the hopper is empty before lifting the machine.
1. Place the platform in the raised position.
2. Place the hopper in the dump position.
3. Install the cylinder lock.
4. Attach a chain or straps to each of the lift
points.
5. Remove any slack in the chains or straps to
ensure that the machine is properly balanced.
3440-398A
IMPORTANT
G380480
IMPORTANT
G380479
Page 5–4
Maintenance: Pre-Maintenance Procedures
Advertisement
Table of Contents
