Battery Service (continued)
Charge the machine in temperatures 0° to 45°C (32° to 113°F).
The onboard charger will not function in temperatures exceeding this range.
1. Park the machine in the designated location for
charging.
2. Shut off the machine and remove the key.
3. Ensure that the electrical service disconnect
switch is in the
4. Open the cover for the charger cord storage.
5. Insert the charger plug into a grounded
electrical outlet.
6. Observe the display to ensure that the
batteries are charging.
7. When the machine reaches a sufficient level, disconnect the charger cord from the
outlet.
8. Store the charger cord in the storage and close the cover.
9. Start the machine and verify the charge level using the display.
Maintenance: Electrical System Maintenance
IMPORTANT
position.
OFF
Page 5–9
G387189
3440-398 A