Table of Contents
Advertisement
Lowering the Hopper without Power (continued)
4. Disconnect the hose fittings in the manifold
block and allow the fluid to drain into the pan.
Note:
recycling center.
5. Connect the hose fittings.
6. Use a hoist or have 2 people hold up the
hopper and remove the cylinder lock.
7. Carefully lower the hopper.
8. After making repairs, install the hoses to the
manifold block fittings.
9. Raise the hopper, secure with the cylinder
lock, and add hydraulic fluid.
Operation: After Operation
Dispose of the used fluid at a certified
G387430
Page 4–9
3440-398 A
Advertisement
Table of Contents
