Lubrication; Greasing The Machine - Toro 68037 Operator's Manual

Lubrication

Greasing the Machine

Grease Type: General-purpose grease.
Note:
Remove the blue protection caps, if applicable, before greasing and replace when
finished.
1. Park the machine on a level surface.
2. Shut off the machine.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting.
5. Pump grease into the fittings until grease begins to ooze out of the fittings
(approximately 3 pumps).
6. Wipe up any excess grease.
3440-398A
G387212
Page 5–6 Maintenance: Lubrication