Lowering The Hopper Without Power - Toro 68037 Operator's Manual

After Operation Safety (continued)
• Remove metal items such as rings, bracelets, necklaces, and watches when working
with a lithium-ion battery. A lithium-ion battery can produce enough current to cause a
severe burn.
• Never operate the charger without good visibility or light.
• Use an extension cord capable of handling 15 A or more. If you are charging outdoors,
use an extension cord rated for outdoor use.
• If the power supply cord is damaged while it is plugged in, disconnect the cord from the
wall receptacle and contact an Authorized Service Dealer for a replacement.
• Unplug the charger from the electrical outlet when not in use, before moving it to another
location, or prior to servicing it.
• Do not disassemble the charger. Take the charger to an Authorized Service Dealer when
service or repair is required.
• Unplug the power cord from the outlet before starting any maintenance or cleaning to
reduce risk of electric shock.
• Maintain or replace safety and instruction labels as needed.
• Do not operate the charger with a damaged cord or plug. Contact an Authorized Service
Dealer to obtain a replacement cord.
• If the charger has received an impact, been dropped, or otherwise damaged, do not use
it; take it to an Authorized Service Dealer.

Lowering the Hopper without Power

1. Install the cylinder lock.
2. Ensure that the hopper is empty.
3. Place a large drain pan under the hydraulic-manifold block.
3440-398A
G380311
Page 4–8 Operation: After Operation