Operating The Machine; Operating The Hopper - Toro 68037 Operator's Manual

Operating the Machine

1. Step onto the machine.
When mounting the machine, slippery or uneven ground may cause you to fall.
Always have 3 out of 4 arms/legs in contact with the machine when you mount or
dismount the machine.
2. Turn the key to the
3. Move the machine in the desired direction:
• Forward
• Backward
switch.
Note:
faster the machine travels.
4. Release the speed control handle to stop the
machine.
5. Put the drive controls in the
and turn the key switch to the

Operating the Hopper

Hopper capacity: 1134 kg (2,500 lb)
Do not exceed the load capacity of the machine.
1. Position the machine where you intend to
dump the load.
2. Dump the hopper by pushing the top of the
dump switch
3. Lower the hopper by pushing the bottom of the
dump switch
Note:
automatically. To stop the automatic movement, push on the hopper switch in any
direction.
3440-398A
position.
ON
—push the top of the switch.
—push the bottom of the
The more you squeeze the handle, the
.
.
If you hold the bottom of the switch for 1 second, the hopper fully lowers
CAUTION
position
NEUTRAL
position.
OFF
IMPORTANT
Page 4–6
G380320
G380321
Operation: During Operation