4 10/100/1000tx plus 4 sfp managed switch (99 pages)
Summary of Contents for MiLAN TR-TP-HB-1600
Page 1
Materielkontroll (DEMKO) DEMKO-HAR Institute for Industrial Research and Standards (IIRS) IRS-HAR Norges Elektriske Materielkontroll (NEMKO) NEMKO-HAR National Standards Authority of Ireland (NSAI) NSAI-HAR LAN Master LAN Master TR16 16 Port Active Retiming Hub User’s Guide Model #: TR-TP-HB-1600 Manual 7348.A...
Page 2
Table Of Contents INTRODUCTION A. Technical Support B. Requirements OVERVIEW OF THE LAN Master TR16 A. Features B. Description of the Hardware C. Function of LED’s D. Switches INSTALLING THE HARDWARE A. Installation Considerations B. Pin Assignments for the Twisted Pair Cable Connector C.
Page 3
Regulation And Registration REGULATION AND REGISTRATION Compliance Information UL Listed FCC Regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 4
Overview Of The LAN Master TR16 OVERVIEW OF THE LAN Master TR16 The LAN Master TR16 sixteen Port Active Media Hub is a standalone, active retiming concentrator with secondary backup path. It has 16 lobe ports plus one RI, one RO port and an internal power supply.
Page 5
Mpls, MN 55344 ATTENTION: Couper le courant avant de replacer le fusible. Input Power: 100-240 V Model#: TR-TP-HB-1600 Figure 2.2 Back View of the LAN Master TR16 Unit LAN Master TR16 TRANSITION E N G I N E E R I N G , I N C .
Page 6
C. Function of LED’s INSERT/BYPASS LED Each LAN Master TR16 port has an associated Insert/Bypass LED. The LED should remain lit if a good twisted pair cable is attached into a LAN Master TR16 port and the station power is on. If the LED is not lit, and a station is attached to the port, consider the following: •...
Page 7
Installing The Hardware E. Replacing the Fuse If the unit fails to power on, the unit fuse may be open or blown. Disconnect the power cord from the AC wall socket, then from the unit. Warning: Disconnect power before replacing fuse. For continued protection against risk of fire, replace only with same type (European) and rating (250V 2A) of fuse.
INSTALLING THE HARDWARE A. Installation Considerations • The AC power outlet (85 to 265 VAC at 47 to 63 Hz) for the LAN Master TR16 unit is referenced in Appendix D, Technical Specifications. • Suitable rack space to mount the MAU for proper ventilation. •...
Need help?
Do you have a question about the TR-TP-HB-1600 and is the answer not in the manual?
Questions and answers