3 Push the Flex Tube (front face outwards) fully into the mount channel until it engages
with the silicone seals.
Note: To further aid long term stability - If mounting inverted or vertically, we recommend that
you add dots of silicone sealant (Dow Corning® 799, 1199 or equivalent) at regular intervals
between the sides of the Flex Tube and the inside faces of the mounting channel as it is pushed
into place.
• If you should need to remove the Flex Tube, gently pull it out from the mount channel,
taking care not to twist the strip.
www.acclaimlighting.com
Flex Tube
front face
9