Valor Legend G3 Installation Instructions Manual

CSA approved for use ONLY with Valor Heater Models 738, 739 and
RF24XB when installed in the RA24ZC Zero Clearance Kit
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
Note: This kit must be installed by a qualifi ed installer, service
agency or gas supplier. These instructions are to be used in
conjunction with the fi replace main installation instructions.
The 741SFB Contemporary Steel Front in black or 741SVI
Contemporary Steel Front in vintage iron are designed
to be used along with an outer surround trim (supplied
separately) on the Valor Legend G3 heaters 738 or 739
or Retrofi re RF24XB when installed in the RA24ZC Zero
Clearance Kit.
The Contemporary Front fi ts within the outer surround trim
and clips onto the standard mounting brackets supplied
with the heaters and ZC kit.
The Contemporary Front is compatible with all outer
surround trims and cast iron surrounds available for use
with the heaters 738 and 739 and RF24XB in RA24ZC.
The Contemporary Front is equipped with a barrier screen.
The barrier screen is designed specifi cally to prevent any
contact with the glass of the fi replace which becomes hot
during operation and remains hot when cooling.
4001895-05
© Copyright Miles Industries Ltd., 2014
L
EGEND
741 Contemporary Front

Installation Instructions

HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
G3
IN STA LLER
Leave this manual
with the appliance.
CO N SUM ER
Retain this manual
for future reference.
Overview
(Heater and trim sold separately)
738, 739 or
RF24XB in
RA24ZC
Trim
Contemporary Front