YUTAKI CASCADE CONTROLLER ATW-YCC-03
•
Enable or disable the individual DHW for each module.
•
Select Next and press OK button.
•
Configure thermostat (1 or 2): None, wired or wireless.
•
Check RT address if wired is selected.
•
Select Wireless binding ID (1 or 2) if wireless is selected.
•
Configure Fan coils: Deactivated, cooling, heating or heat & cool if wired is selected.
•
Select Wizard complete and press OK button.
•
Select Yes to complete the configuration.
•
Press OK button to go to the main screen.
274
PMML0575 rev.2 - 03/2022