Timer And Schedule Configuration - Hitachi YUTAKI RWM-2R1E Installation & Operation Manual

YUTAKI CASCADE CONTROLLER ATW-YCC-(01-02)

10.6.2.2 Timer and schedule configuration

?
N O T E
Timer settings are only valid if the corresponding zone is in ON state at the time of execution of the respective timer program.
The LCD controller must be set to the correct date and time before using the timer function.
Select the desired area to apply the timer function or delete all timers configuration:
The timer function allows the selection of simple and scheduled timers, as shown in the figures below:

Setting of Simple timer
Setting of temperature or operation mode (ECO or Comfort) to be applied during operation for a defined period, after which
operation returns to the previous settings. This type of timer cannot be used to modify the operation state from ON to OFF, which
can be accomplished with a Schedule timer.
Timer type:
Selection of the timer type
• Disable
• Simple timer
• Schedule
Frequency:
Selection of the timer frequency
• Never
• Once
• Everyday
• Weekend
• Work day
Starting time:
Use the arrow keys to select the starting
time of the timer
249 PMML0575 rev.2 - 03/2022
Heating/Cooling (Air): To set the timer to
adjust the room temperature. Only when using
room thermostats.
Heating/Cooling (Water): To set the timer to
adjust the water working conditions.
1 / 2
2 / 2
Mode: Selection of the working mode
• Eco
• Comfort
• Setting temperature: when this option
is selected is possible to configure the
temperature using the arrow keys. (Only when
OTC is Fix)
Stopping time:
Use the arrow keys to select the stopping time of
the timer
Configuration parameters:
Configure the temperature for the Eco or Comfort
Mode.
Only available for Air settings (Circuit 1 or 2).