Hitachi YUTAKI RWM-2R1E Installation & Operation Manual page 167

UNIT CONTROLLER (PC-ARFH1E)

Setting of Schedule timer
Setting of temperature, operation mode (ECO or Comfort) or change of operation state from ON to OFF for a defined period, after
which operation returns to the previous settings. Manual operation of the unit controller has priority over schedule settings.
Timer type: Selection of the timer type
• Disable
• Simple timer
• Schedule
Timer configuration: New
screen appears to configure a
schedule timer. See explanation
below.
Copy to circuit 2:
It is possible to copy the schedule timer
to circuit 2.
Pressing the OK button with "Timer Configuration" being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to five timer events can be defined for each weekday, and these can be used for turning the operation ON or OFF, to change the
setting temperature or the working mode (Eco/Comfort). Pressing the OK key with one of the weekdays being selected in the weekly
calendar screen displays the detailed schedule for the weekday.
Timer configuration as Setting temperature
Pressing the "Menu" button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
153 PMML0575 rev.2 - 03/2022
Change Mode: Selection of the working mode
(Only for Circuit 1 or Circuit 2). In Water mode
only when circuit is Fix.
• Mode (uses Eco/Comfort configurations)
• Setting temperature.
Reset configuration:
Press OK button to reset scheduled timers.
Timer configuration as Mode