Cleaning And Troubleshooting Your Waterpik® Water Flosser - Waterpik Complete Care WP-800 Series Manual

10
CLEANING AND TROUBLESHOOTING YOUR WATERPIK® WATER FLOSSER
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial
solutions. Afer using any special solution, rinse unit to prevent clogging by partially
flling reservoir with warm water and running unit with tip pointed into sink until
unit is empty.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product when
necessary by using a sof cloth and mild non-abrasive cleanser. The water reservoir
is removable for easy cleaning and is top rack dishwasher safe.
General Cleaning/Removing Hard Water Deposits
Hard water deposits may build up in your unit, depending on the mineral content of
your water. If lef unattended, it can hinder performance.
Cleaning internal parts: add 2 tablespoons of white vinegar to a full reservoir of
warm water. Point the handle and tip into sink. Turn unit ON and run until reservoir is
empty. Rinse by repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal performance.
Leakage
If leaking due to a damaged hose, replacement hoses and handles can be purchased
at www.waterpik.com or contact Water Pik Inc. customer service for a self
service repair kit.