Cleaning And Troubleshooting Your Waterpik; Water Flosser - Waterpik Water Flosse WP-60 Manual

8

CLEANING AND TROUBLESHOOTING YOUR WATERPIk

Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product when
necessary by using a soft cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning and is top rack
dishwasher safe.
Note: Remove reservoir valve before placing reservoir in dishwasher.
Remove
Removing Hard Water Deposits
Add 2 tablespoons of white vinegar to a full reservoir of warm water. Set
pressure control dial to high, point the handle and tip into sink. Turn unit
ON and run until reservoir is empty. Rinse by repeating with a full reservoir
of clean warm water.
Replace

WATER FLOSSER

®
Leakage
If leaking due to damaged hose, replacement hoses and handles can
be purchased at www.waterpik.com or contact Water Pik Inc. customer
service for a self service repair kit.
If leakage occurs from the reservoir, ensure the valve is right
side up or contact Water Pik Inc. customer service for a
replacement valve.
Service Maintenance
Waterpik Water Flossers have no consumer serviceable electrical items
®
and do not require routine service maintenance. For all accessories go to
www.waterpik.com.
You may also call our toll-free customer service number at 1-800-525-2774.
Refer to the serial and model numbers in all correspondence. These
numbers are located on the bottom of your unit.
Still have questions? Go to www.waterpik.com.