Cleaning And Troubleshooting Your Waterpik - Waterpik Complete Care CC-01 Instruction Manual

10

CLEANING AND TROUBLESHOOTING YOUR WATERPIK

WATER FLOSSER
®
Using Mouthwash and Other Solutions
Your Waterpik Water Flosser can be used to deliver mouthwash and
®
antibacterial solutions. After using any special solution, rinse unit to prevent
clogging by partially filling reservoir with warm water and running unit with
ON
tip pointed into sink until unit is empty.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product
when necessary by using a soft cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning and is top rack
dishwasher safe.
General Cleaning/Removing Hard Water Deposits
Hard water deposits may build up in your unit, depending on the mineral
content of your water. If left unattended, it can hinder performance. Cleaning
internal parts: add 2 tablespoons of white vinegar to a full reservoir of warm
water. Point the handle and tip into sink. Turn unit ON and run until reservoir
is empty. Rinse by repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal
performance.
Leakage
If leaking due to a damaged hose, replacement hoses and handles can be
purchased at waterpik.co.uk or contact Water Pik Inc. customer service for a
self service repair kit.