Cleaning And Troubleshooting Your Waterpik; Water Flosser - Waterpik WP–700 Instructions Manual

10

CLEANING AND TROUBLESHOOTING YOUR WATERPIK

Using Mouthwash and Other Solutions
Your Waterpik Water Flosser can be used to deliver
®
mouthwash and antibacterial solutions. After using
any special solution, rinse unit to prevent clogging by
partially filling reservoir with warm water and running
unit with tip pointed into sink until unit is empty.

WATER FLOSSER

®
Cleaning
Before cleaning, unplug from the electrical outlet.
Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning and
is top rack dishwasher safe.
NOTE: Remove reservoir valve before placing
reservoir in dishwasher.
Remove
Removing Hard Water Deposits
Add 2 tablespoons of white vinegar to a full reservoir
of warm water. Set pressure control dial to high, point
the handle and tip into sink. Turn unit ON and run
until reservoir is empty. Rinse by repeating with a full
reservoir of clean warm water.
Replace