Kia Carnival 2022 Owner's Manual page 602

Maintenance
2. Raise the wiper arm and pull out
the wiper blade assembly.
OKA4070013
3. Lift up the wiper blade, and pull
the blade to remove it.
OMQ4070104L
7 32
4. Install the new blade assembly by
inserting the center part into the
slot in the wiper arm until it clicks
into place.
OMQ4070094L
5. Make sure the blade assembly is
installed firmly by trying to pull it
slightly.
If the replacement is complete,
put down the wiper arm to place
it on the rear windshield, and turn
the vehicle ignition to ON and
operate the wipers to check the
blade is installed correctly.
To prevent damage to the wiper
arms or other components, have the
wiper blade replaced by a profes -
sional workshop. Contact and visit
an authorized Kia dealer.
CAUTION
If the wiper arm receives too much
force while pulling the blade, the
center part may be damaged.
Wiper blades