Kia Carnival 2022 Owner's Manual page 265

Features of your vehicle
and deselect to turn off the func -
tion.
WARNING
For your safety, change the Set -
tings after parking the vehicle at a
safe location.
Function operation
Display and control
After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following
the procedure below.
- Place the headlamp switch in
the AUTO position and push the
headlamp lever towards the
instrument cluster. The High
Beam Assist (
will illuminate on the cluster
and the function will be
enabled.
- - When the function is enabled,
high beam will turn on when
vehicle speed is above 25 mph
(40 km/h). When vehicle speed
is below 15 mph (25 km/h), high
beam will not turn on.
- The High Beam (
light will illuminate on the clus -
ter when high beam is on.
When High Beam Assist is operat -
ing, if the headlamp lever or
switch is used, the function oper -
ates as follow:
) indicator light
) indicator
- If the headlamp lever is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist canceled. When you let
go of the headlamp lever, the
lever will move to the middle
and the high beam will turn off.
- If the headlamp lever is pulled
towards you when the high
beam is on by High Beam
Assist, low beam will be on and
the function will turn off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and
the corresponding lamp will
turn on.
When High Beam Assist is operat -
ing, high beam switches to low
beam if any of the following con -
ditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle
in front is detected.
- When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other
lights are detected.
Lighting
4
4 157