Kia Carnival 2022 Owner's Manual page 195

Features of your vehicle
To check if your garage door opener
is compatible with this feature,
refer to www.homelink.com/com -
patible/Two-way-Communication. If
your garage door opener has this
functionality, AND the Two-Way
Communication indicators (4), (6) in
the mirror appear while the garage
door is opening/closing, then no fur -
ther steps are needed. Two-Way
Communication Programming is
already complete. However, if your
garage door opener has this func -
tionality, AND the Two-Way Com -
munication indicators (4), (6) in the
mirror DO NOT appear while the
garage door is opening/closing, use
the following instructions to enable
this functionality.
1. In your vehicle, press and hold the
programmed HomeLink button
for 2 seconds, then release. Con -
firm that the garage door is mov -
ing. AFTER it stops, you will have
one minute to complete the fol -
lowing steps:
* A ladder and/or second person
may simplify the following
steps.
2. On your garage door opener in
your garage, locate the "Learn"
button (usually near where the
hanging antenna wire is attached
to the garage door opener). If
there is difficulty locating this
button, refer to the device's
owner's manual.
3. Press and release the "Learn"
button.
4. A light on your garage door
opener may flash, and your Two-
Way Communication indicators
(4), (6) in your vehicle may flash,
confirming completion of the pro -
cess.
5. Return to the vehicle and firmly
press and release the pro -
grammed HomeLink button to
activate your garage door. The
Two-Way Communication indica -
tors (4), (6) flash in orange when
the door is moving. Do not make
any additional button presses
until AFTER the garage door has
come to a complete stop.
6. Your Two-Way Communication
programming is now complete.
NOTICE
If your garage door opener has
Two-Way Communication function -
ality, it is possible for HomeLink to
stop functioning the garage door
shortly after initial programming, if
the Two-Way Communication Pro -
gramming wasn't properly com -
pleted. This usually happens after
the first 10 times a programmed
HomeLink button is pressed. If you
experience this, completing the
"Programming a New HomeLink
Button" and "Two-Way Communica -
tion Programming" will restore door
operation.
Mirrors
4
4 87