Turning The Appliance On - DeLonghi ETAM3636X Instructions For Use Manual

• You should customise water hardness as soon as possible
following the instructions in section "12. Setting water
hardness".
1. Plug the power cord (C8) connector into the socket (A13) at
the back of the appliance and connect the appliance to the
mains electricity supply (fig. 1). Make sure the main switch
(A20) on the side of the appliance is pressed (fig. 2).
1
You must first choose the language by moving backwards and
forwards with the arrows < (B12) or > (B8) (fig. 9), or waiting
until the languages scroll through on the display (B4) automat-
ically at intervals of about 3 seconds:
2. When "English" appears, press and hold the
button (B5) (fig. 3) for a few seconds until "English set" is
displayed.
3
Follow the instructions indicated on the appliance display:
3. "FILL TANK": remove the water tank (A7) (fig. 4), open the
lid (A8) (fig. 5), fill to the MAX line with fresh water (fig. 6),
replace the lid and put the tank back in the appliance.
4. "INSERT WATER SPOUT": Check that the hot water spout
(C6) is inserted on the connection nozzle (A12) and place a
container holding a minimum of 100ml underneath (fig. 7).
5. " Water delivery Press OK" appears on the display;
2
4
5
7
6. Press the
ers water from the spout then goes off automatically.
The coffee machine is now ready for normal use.
Please note!
• When setting up the appliance, you need to make 4-5 cups
of coffee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
• To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a
water softener filter (C4) as described in section "15. Water
softener filter". If your model is not provided with a filter,
you can request one from De'Longhi Customer Services.

4. TURNING THE APPLIANCE ON

Please note!
Before turning the appliance on, make sure the main switch
(A20) is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A11) and is collected in the drip tray (A16) underneath. Avoid
contact with splashes of water.
6
6
button to confirm. The appliance deliv-