DeLonghi ETAM3636X Instructions For Use Manual page 23

PROBLEM
The milk contains The milk contains
large bubbles and large bubbles and
squirts out of the squirts out of the
milk spout (D5) or milk spout (D5) or
there is little froth there is little froth
The milk contains The milk contains
large bubbles and large bubbles and
squirts out of the squirts out of the
milk spout or there milk spout or there
is little froth is little froth
The appliance does not come on The appliance does not come on
The infuser cannot be extracted The infuser cannot be extracted
POSSIBLE CAUSE
The milk is not cold enough or is not The milk is not cold enough or is not
semi-skimmed. semi-skimmed.
The froth adjustment dial (D1) is incor- The froth adjustment dial (D1) is incor-
rectly adjusted. rectly adjusted.
The milk container lid (D2) or froth The milk container lid (D2) or froth
adjustment dial (D1) on the milk con- adjustment dial (D1) on the milk con-
tainer (D) is dirty. tainer (D) is dirty.
The hot water/steam connection noz- The hot water/steam connection noz-
zle (A12) is dirty. zle (A12) is dirty.
The hot water/steam spout (C6) is The hot water/steam spout (C6) is
dirty. dirty.
The power cord (C8) connector is not The power cord (C8) connector is not
inserted correctly. inserted correctly.
It is not plugged into the mains socket. Plug into the mains socket (fig. 1). It is not plugged into the mains socket.
The main switch (A20) is not turned on. Press the main switch (fig. 2). The main switch (A20) is not turned on.
The appliance has not been turned off The appliance has not been turned off
correctly correctly
23
SOLUTION
Use skimmed or semi-skimmed milk at refrige- Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk. not as you wished, try changing brand of milk.
Adjust according to the instructions in section Adjust according to the instructions in section
"8.2 Adjusting the amount of froth" "8.2 Adjusting the amount of froth"
Clean the milk container lid and dial as de- Clean the milk container lid and dial as de-
scribed in section "10.10 Cleaning the milk scribed in section "10.10 Cleaning the milk
container" container"
Clean the connection nozzle as described in Clean the connection nozzle as described in
section "10.11 Cleaning the hot water/steam section "10.11 Cleaning the hot water/steam
connection nozzle" connection nozzle"
Clean as described in section "10.11 Cleaning Clean as described in section "10.11 Cleaning
the hot water/steam connection nozzle". the hot water/steam connection nozzle".
Insert the connector as far as it will go in the Insert the connector as far as it will go in the
socket (A13) at the back of the appliance (fig. socket (A13) at the back of the appliance (fig.
1). 1).
Plug into the mains socket (fig. 1).
Press the main switch (fig. 2).
Turn the appliance off by pressing the Turn the appliance off by pressing the
ton (A23) (section "5. Turning the appliance off"). ton (A23) (section "5. Turning the appliance off").
but- but-