Do you have a question about the Maestosa EPAM96X.75 and is the answer not in the manual?
Questions and answers
Les
March 18, 2025
water circuit not working
1 comments:
Mr. Anderson
March 18, 2025
To fix the water circuit issue on the DeLonghi Maestosa EPAM96X.75:
1. Place a container with at least 100 ml capacity under the hot water/steam spout. 2. Press "OK" to start filling the water circuit. Delivery will stop automatically. 3. If the problem persists, ensure the water tank is fully inserted.
CONTENTS 10. MAKING HOT CHOCOLATE ......14 1. INTRODUCTION ..........7 11. MAKING COLD BEVERAGES ......15 1.1 Letters in brackets .........7 11.1 Making cold coffee ........15 1.2 Troubleshooting and repairs ......7 11.2 Making milk froth Ж (cold) ......16 1.3 Download the App! ........7 12.
C1. "Total Hardness Test" indicator paper (attached to page 2 appliance. of the English instructions) Please note! C2. Pre-ground coffee measure (in the compartment (A2)) Check compatible devices on "compatibledevices.delonghi. C3. Descaler com". C4. Water softener filter C5. Cleaning brush 2.
2.4 Description of the milk container 3. "FILL TANK WITH FRESH WATER. USE BUTTON ON THE RIGHT TO OPEN THE FRONT DOOR": (page 2 - D ) • Press the button (A15) and open the door (A16) (fig. 3); D1. Milk container lid •...
SPOUTS" is displayed. As well as heating the boiler, this Please note! • If the appliance is not used for more than 3-4 days, when also heats the internal circuits by circulating hot water. you turn it on again, we strongly recommend performing Please note! Using for the first time: 2-3 rinses before use;...
4. Press "←" to save the new selection and go back to the • Select the mill you want to adjust ( homepage. • Follow the previous instructions in the tutorial to se- lect the required grinding fineness by pressing directly 6.9 Bluetooth on one of the selectable numbers in the highlighted This function enables or disables the protection PIN to connect...
9. "Insert water tank. Press OK to empty water circuit": put 2. Select "Statistics". To display the information and scroll be- the tank back in the appliance and press "OK"; tween screens, press "Next" or "Back". 10. Water circuit emptying underway": wait for the appli- 3.
7.5 General indications for making coffee-based 2. After setting the parameters, press to make 1 cup, or (if possible for the selected beverage) beverages make 2 cups. The appliance starts making the coffee and • While the machine is making coffee, delivery can be inter- the image of the selected beverage appears on the display, rupted at any moment by pressing "Stop"...
5. The appliance proceeds with preparation and the image 6. Attach the milk container (D) to the connection nozzles of the selected beverage appears on the control panel, (A11) and push as far as it will go (fig. 22). The machine together with a progress bar which gradually fills as the emits a beep (if the beep function is enabled);...
with a progress bar which gradually fills as the operation pro- from the milk spout (D6) and stops automatically when ceeds and a description of each individual phase (grinding, cleaning is complete. milk delivery, brewing coffee, etc.). 5. Before extracting the milk container, place the milk spout 4.
Important • You are recommended to clean the carafe as soon as pos- sible (see section “17.11 Cleaning the “Mix Carafe” (E)”). Make sure the hole in the funnel shown in fig. 33 is clean. Please note! 11. MAKING COLD BEVERAGES •...
4. Press "Next" to move on to the next step (or "Back" to go • • At the end of preparation, if the froth is not satisfactory, back to the previous screen); you can continue mixing by pressing "Extra". When the re- 5.
7. "Close lid and insert carafe. Press OK to start": close the lid 6. The machine delivers the chosen quantity of hot water, and attach the carafe to the connection nozzles (A11) (fig. then delivery stops automatically. 34): the appliance beeps (if the beep function is enabled); Please note! •...
14.2 Cleaning the hot water/steam spout after Please note! • If "Energy Saving" mode is active, you may have to wait a few seconds before the hot water is delivered. Always clean the hot water/steam spout (F) after use to avoid the •...
• You can rename your personal profile by connecting with plays the message "Settings saved on both double and the DeLonghi Coffee Link App; single option"; • To customise the profile icon, see section “6.12 Edit profile”.
17.4 Cleaning the drip tray and drip tray grille • Do not use metal objects to remove encrustations or coffee deposits as they could scratch metal or plastic surfaces. Important! The drip tray (A22) is fitted 17.2 Cleaning the internal circuit with a level indicator (red) If the appliance is not used for more than 3/4 days, before using showing the amount of water...
2. Extract the water tank (fig. 4), remove the water softener filter (if present) and rinse it with running water; 3. Empty the water tank and clean with a damp cloth and a little washing up liquid. Rinse thoroughly with water; 4.
17.10 Cleaning the milk container 6. Wash all the components thoroughly with hot water and mild washing-up liquid. All components (except the To keep the frother efficient, clean the milk container (D) every thermal casing) are dishwasher safe, placing them in the two days as described below: top basket of the dishwasher.
18. DESCALING Important! Danger of scalding Hot water containing acid flows from the hot water/steam and Important! coffee spouts. Take care to avoid contact with splashes of this • Before use, read the instructions and the labelling on the descaler pack. solution.
20. WATER SOFTENER FILTER Please note! • If the descaling cycle is not completed correctly (e.g. no Certain models are fitted with a water softener filter (C6). If this electricity) we recommend repeating the cycle; is not the case with your model, you are recommended to pur- •...
Please note! 8. "Insert filter in housing and push down fully" (fig. 63). Press "Next"; After two months (see date indicator) or when the appliance has 9. "Insert water tank" (fig. 6): close the tank with the lid not been used for 3 weeks, you should replace the filter even if (A24), then put the tank back in the machine and close the the message has not yet been displayed.
Page 26
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY INSERT WATER TANK The tank (A25) is not correctly in place. Insert the tank correctly and press as far as it will go. CLOSE FRONT DOOR The front door (A16) is open or not closed Close the front door and press until it clicks into correctly.
Page 27
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY EMPTY GROUNDS CONTAINER The grounds container (A18) is full. Clean as described in section “17.3 Pulizia del contenitore dei fondi di caffè” INSERT GROUNDS CONTAINER After cleaning, the grounds container (A18) has Press the button (A15), open the door (A16), not been put back in the appliance.
Page 28
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY NOT ENOUGH COFFEE. The beans present sensor is dirty and not work- Remove the dust from the sensors using a cot- ing correctly CONSULT MANUAL OR ton bud. CUSTOMER SERVICES If the problem persists, contact De'Longhi Cus- tomer Services.
Page 29
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY "IF NEEDED, FILL MILK While preparing milk-based beverages, if the Open the refill lid(D3) on the milk container lid CONTAINER USING THE milk in the container is not enough to make (D1) and pour in the milk without exceeding REFILL LID"...
Page 30
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY PRE-GROUND MODE IS The pre-ground coffee function has been se- Press "OK" to go back to the previous screen. NOT ALLOWED WITH THIS lected for a beverage where use of pre-ground BEVERAGE coffee is not possible/envisaged. FILL BEANS CONTAINERS The beans present sensor is dirty and not work- Remove the dust from the sensors using a cot-...
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY CLEANING UNDERWAY The appliance has detected impurities in its Wait for the appliance to be ready again and internal circuits. reselect the required beverage. Contact Cus- tomer Services if the problem persists. MACHINE COOLING FAULT. A malfunction is preventing correct cooling of Press "OK"...
Page 32
PROBLEM POSSIBLE CAUSE REMEDY The coffee is delivered too slowly or a The coffee is ground too finely. Enter the settings menu (B6) and adjust the drop at a time. coffee mill. The effect is only visible after deliv- ering 5 coffees (see section “6.4 Adjust mill”). Coffee does not come out of one or The coffee spouts (A17) are blocked.
Page 33
PROBLEM POSSIBLE CAUSE REMEDY The machine emits noises or small The machine is ready for use, or has re- This is part of normal operation. To limit the puffs of steam while not in use cently been turned off, and condensate phenomenon, empty the drip tray.
Page 34
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
Need help?
Do you have a question about the Maestosa EPAM96X.75 and is the answer not in the manual?
Questions and answers
water circuit not working
To fix the water circuit issue on the DeLonghi Maestosa EPAM96X.75:
1. Place a container with at least 100 ml capacity under the hot water/steam spout.
2. Press "OK" to start filling the water circuit. Delivery will stop automatically.
3. If the problem persists, ensure the water tank is fully inserted.
This should resolve the issue.
This answer is automatically generated