First Use; Setting The Time For The First Time - Beko BBIM13301XPE User Manual

Before you start using your device, it is
recommended that you follow the steps
described in the following sections:
Setting the time for the first
time
A Always set the time of day before
using your lathe. Whether
you don't adjust it, you can't cook
in some tower models.
1. When you turn on the tower for the
first month, the Time field
"12:00" and the 0 symbol flash on the
display.
2.Press ffi/0 to set the day time.
3.Press the 0 or © key to activate the
Minute field.
4.Press ffi/0 to set the minutes of the
5.Press the 0 key to confirm the setting.
20/FR
» The time of day is set and the 0 symbol
disappears from the display.
A If you do not set the first V time,
"12:00" and the symbols
0 will continue to flash and your
round will not start. For your tower
to operate, you must confirm the
time of day by setting it or by
pressing the 0 key when it is at
"12:00". You can change the time
of day settings later, as described
in the "Settings" section.
A The current time settings V are
canceled in the event of a power failure.
running. They need to be readjusted.
First cleaning
1. Remove all packaging.
2.Remove all lathe accessories
provided inside the product.
3.Turn the unit on and let it run for 30
minutes, then turn it off. In this way,
residues and layers that may have
remained in the lathe during
manufacturing are burnt off and
cleaned.
4.When using the appliance, select the
highest temperature and cooking level
that all heaters in your appliance use.
See "Tour cooking functions". You can
learn how to operate the lathe in the
next section.
5.Please wait for the tower to cool down.
6.Wipe the surfaces of the product with
a damp cloth or sponge and dry with
a cloth.