Using The Device Accessories - Beko BBIM13301XPE User Manual

Using device accessories
Oven shelves
There are 5 shelf position levels in the
cooking zone. You can also see the
order of the shelves by looking at the
numbers on the front frame of the
lathe.
Models for cavity without metal
steps
Placing the wire rack and drip pan
on the kitchen shelves
Models for metal bleachers: It is
essential! place the metal grid correctly
on the sides. When placing the metal
grate on the desired step, the open
part must face forward. For better
cooking, the wire rack should be fixed
with the stopper on. It must not
exceed the stopper and come into
contact with the rear wall of the lathe.
Models for cavity without metal
steps:
It is essential! correctly place the metal
grid on the side shelves. The metal grid
faces only one direction when placed
on the shelf. When placing the wire
rack on the desired shelf, the open side
should face forward.
Placing the drip pan on the kitchen
shelves
Models for metal bleachers: It is also
important to place them correctly on
the side metal bleachers. When you
place the tray on the desired level, its
side designed to be held must be
forward.
For better cooking, the tray must be fixed
with the stopper on the metal. It must not
pass through the stopper and come into
contact with the rear wall of the lathe.
17/EN