STEINEL Multisensor True Presence IP Manual page 36

3. System description
Proper use
– Multisensor.
– With motion detection (True Presence).
– Without motion detection (Air).
– For ceiling mounting indoors.
– Connection to an Ethernet network.
– AP version for surface-mounted installation.
– UP version for concealed installation.
Multisensor versions
– Multisensor True Presence IP.
– Multisensor AIR IP without presence detection
– Both versions are each available as surface-mounted
type (AP) or concealed type (UP).
Multisensor
Sensor variables:
– Presence (multisensor True Presence IP only)
– Light level
– Room temperature
– Humidity
– Air pressure
– CO₂
– VOC (volatile organic compounds)
– Noise level
The sensors support the IP-based REST API, BACnet and
MQTT protocols. Sensor data is provided for this purpose
and can be processed in appropriate systems.
– 4 –
Index