AOpen MX6E PLUS Manual page 93

Appendix
Jumper Table Summary
Selecting the CPU Frequency
This motherboard is jumper-less design. The only jumper left is Clear CMOS,
which is reserved in case you forget your password.
The CPU frequency selection is set by going into:
BOIS Setup à Chipset Features Setup à CPU Clock Frequency
(The possible setting is 66, 68.5, 75 and 83.3 MHz)
BOIS Setup à Chipset Features Setup à CPU Clock Ratio
(The possible setting is 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x,
7.5x, and 8x)
INTEL Pentium II CPU Core Frequency
Klamath 233 233MHz =
Klamath 266 266MHz =
Klamath 300 300MHz =
Klamath 333 333MHz =
Celeron 266 266MHz=
Celeron 300 300MHz
Selecting the CPU Voltage
This motherboard supports Pentium II (Klamath) VID function, the CPU core
voltage is automatically detected, the range is from 1.3V to 3.5V.
C
Ratio External Bus Clock
3.5x 66MHz
4x 66MHz
4.5x 66MHz
5x 66MHz
4x 66MHz
4.5x 66MHz
C-1