Table of Contents
Advertisement
Power Management à WakeUp Time (hh:mm:ss)
WakeUp Time
(hh:mm:ss)
hh:mm:ss
Power Management à IRQ 8 Clock Event
IRQ 8 Clock Event
Enabled
Disabled
Power Management à IRQ [3-7,9-15],NMI
IRQ [3-7,9-15],NMI
Enabled
Disabled
Power Management à Primary IDE 0
Power Management à Primary IDE 1
Power Management à Secondary IDE 0
Power Management à Secondary IDE 1
Power Management à Floppy Disk
Power Management à Serial Port
Power Management à Parallel Port
Primary IDE 0
Enabled
Disabled
This item is displayed when you enable the RTC
Wake Up Timer option. Here you can specify what
time you want to wake up the system.
To enable or disable the detection of IRQ8 (RTC)
event for power down state transition. OS2 has
periodically IRQ8 (RTC) interruptions, If IRQ8 is not
set to Disabled, OS/2 may fail to go into
Doze/Standby/Suspend mode.
To enable or disable the detection of IRQ3-7, IRQ9-
15 or NMI interrupt events for power down state
transition.
These items enable or disable the detection of IDE,
floppy, serial and parallel port activities for power
down state transition. Actually it detects the read/write
to/from I/O port.
AWARD BIOS
3-23
Advertisement
Table of Contents
