Table of Contents
Advertisement
4.2
Setting Up in Windows 95
AOpen Bonus Pack CD-ROM contains the Windows 95 drivers and software
(including the Music Center application). Please see the online help for details.
Note: Refer to your Windows 95 manual or online
help for any questions on Windows 95.
4.2.1 Installing the Drivers and the Application
After turning on the system, Windows 95 begins loading and starts detecting
new hardware installed on the system.
1.
When Windows 95 detects the presence of the onboard audio chip, it
begins to build the CX4235 driver database. The New Hardware Found
dialog box displays.
2.
Select Driver from disk provided by hardware manufacturer and click
on OK. Windows 95 prompts you for the driver disk.
3.
Specify the path of the Win95 driver from your CD-ROM drive, then click
on OK. The system will copy the necessary driver files to your hard disk
drive.
Tip: Prepare the Windows 95 CD-ROM disk before
setting up the onboard audio.
prompt you to insert the Windows 95 CD-ROM disk
when you install the joystick or MIDI device.
Note: If the file being copied is older than the file
currently existing in your system, we suggest you to
keep the existing file.
4.
Windows 95 makes changes to the system settings and begins detecting
the following new hardware components:
•
Crystal PnP Audio System Joystick
•
Crystal PnP Audio System Control Registers
•
Crystal PnP Audio System MPU-401 Compatible
Audio
Windows 95 will
4-3
Advertisement
Table of Contents
