AOpen MX6E PLUS Manual page 55

AWARD BIOS
Power Management à Standby Mode
Standby Mode
Disabled
1 Min
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
Power Management à Suspend Mode
Suspend Mode
Disabled
1 Min
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
Power Management à HDD Power Down
HDD Power Down
Disabled
1 Min
.....
15 Min
3-20
This item lets you set the period of time after which
the system enters into Standby mode. In this mode,
the monitor power-saving feature activates. Any
activity detected returns the system to full power. The
system activity (or event) is detected by monitoring
the IRQ signals or other events (such as I/O).
This item lets you set the period of time after which
the system enters into Suspend mode. The Suspend
mode can be Power On Suspend or Suspend to Hard
Drive, selected by "Suspend Mode Option".
This option lets you specify the IDE HDD idle time
before the device enters the power down state. This
item is independent from the power states previously
described in this section (Standby and Suspend).