Table of Contents
Advertisement
AWARD BIOS
Integrated Peripherals à Onboard Parallel Port
Onboard Parallel
Port
3BC/IRQ7
378/IRQ7
278/IRQ5
Disabled
Note: If you are using an I/O card with a
parallel port, make sure that the addresses
and IRQ do not conflict.
Integrated Peripherals à Parallel Port Mode
Parallel Port Mode
SPP
EPP
ECP
ECP + EPP
Integrated Peripherals à ECP Mode Use DMA
ECP Mode Use DMA
3
1
3-34
This item controls the onboard parallel port address
and interrupt.
This item lets you set the parallel port mode. The
mode options are SPP (Standard and Bidirection
Parallel Port), EPP (Enhanced Parallel Port) and ECP
(Extended Parallel Port).
PS/2 compatible mode. EPP enhances the parallel
port throughput by directly writing/reading data to/from
parallel port without latch. ECP supports DMA and
RLE (Run Length Encoded) compression and
decompression.
This item lets you set the DMA channel of ECP mode.
SPP is the IBM AT and
Advertisement
Table of Contents
