Electrical Fuses - Mercedes-Benz GLC 200 4MATIC Owner's Manual

Fitting and removing the towing eye
Press the cover 1 inwards and remove it.
#
Screw in the towing eye clockwise as far as it
#
will go and tighten.
Vehicles with a trailer hitch: vehicles with a trailer
hitch do not have a rear bracket for the towing
eye. Fasten the tow bar to the trailer hitch.
Make sure that cover 1 engages in the
#
bumper when you remove the towing eye.
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
Tow-starting the vehicle
Vehicles with automatic transmission
* NOTE Damage to the automatic transmis-
sion due to tow-starting
The automatic transmission may be damaged
in the process of tow-starting vehicles with
automatic transmission.
Breakdown assistance 417
Vehicles with automatic transmission
#
must not be tow-started.
Vehicles with an automatic transmission must
#
not be tow-started.

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.