Automatic Measures After An Accident - Mercedes-Benz GLC 200 4MATIC Owner's Manual

Table of Contents

Advertisement

58
Occupant safety
System limits
The system will not initiate any action in the fol-
lowing situations:
when reversing
R
or
when the vehicle is towing a trailer and there
R
is a risk of a rear impact
The system will not initiate any braking application
in the following situations:
whilst driving
R
or
when entering or exiting a parking space while
R
using Active Parking Assist
®
Function of PRE-SAFE
Impulse Side
If an imminent side impact is detected, PRE-
®
SAFE
Impulse Side can pre-emptively move the
front seat vehicle occupant's upper body towards
the centre of the vehicle. It does this by rapidly
inflating an air cushion in the outer seat side bol-
ster of the seat backrest on the side on which the
impact is anticipated. This increases the distance
between the door and the vehicle occupant.
®
If PRE-SAFE
Impulse Side has been deployed or
is faulty, the
PRE-SAFE impulse side inoperative
See Owner's
Manual(
page 459) display mes-
/
sage appears.

Automatic measures after an accident

Depending on the type and severity of the acci-
dent, and depending on the vehicle's equipment,
the following measures can be implemented, for
example:
automatic braking (post-collision brake)
R
activating the hazard warning lights
R
triggering an automatic emergency call
R
(
page 371)
/
switching off the engine
R
To start the vehicle again, switch the vehicle
off and on once more (
page 180). Depend-
/
ing on the type and severity of the accident,
you may no longer be able to start the vehicle.
switching off the fuel supply
R
vehicles with hybrid drive: switching off the
R
hybrid system and high-voltage on-board elec-
trical system
unlocking the vehicle doors
R
lowering the side windows
R
displaying the emergency guide in the central
R
display
switching on the interior lighting
R
Function of the post-collision brake
Depending on the accident situation, the post-col-
lision brake can minimise the severity of a further
collision or even avoid it.
If an accident is detected, the post-collision brake
can implement automatic braking. When the vehi-
cle has come to a standstill, the electric parking
brake is automatically applied.
The driver can cancel automatic braking by taking
the following actions:
braking more strongly than automatic braking
R
fully depressing the accelerator pedal with
R
force

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents