Figure 65: Routing Engine Ethernet Cable Connector; Figure 66: Ethernet Port On The Cip - Juniper T4000 Hardware Manual

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
labeled connect to the Routing Engine in the upper Routing Engine slot (
HOST 0
and the ports labeled
HOST 1
Engine slot ( RE1 ).
Plug the other end of the cable into the network device.
4.

Figure 65: Routing Engine Ethernet Cable Connector

Figure 66: ETHERNET Port on the CIP

T4000 Connector Interface Panel (CIP) Description on page 14
Overview of Connecting the T4000 Router to External Devices on page 177
Chapter 21: Connecting the Router to External Devices
connect to the Routing Engine in the lower Routing
),
RE0
181