3.8
Column valve
Introduction
This section describes the column valve module. The module is used to connect, control
and monitor up to two columns, apply sample to a column using a Superloop, and to
use Intelligent packing to automatically pack AxiChrom™ columns.
Illustration
The illustration below shows the front of the column valve module.
6
5
Part
1
2
3
4
ÄKTA pilot 600 User Manual 29274559 AA
7
4
Description
Inlet, from the previous module
Pressure sensor just inside the inlet
IP port for Intelligent packing and CIP
Waste 2 port for waste
3 Description of modules
8
9
3
3.8 Column valve
10
1
2
47