Advertisement
INSTALLATION INSTRUCTIONS
13
NOTE: DO NOT overtighten Screws (R) or surface of Drawer Front (L) may become dimpled.
13.1 Position Drawer Front (L) on each assembled Drawer and secure to Front Drawer Panel (H) with four 1.0"
Screws (R).
14
Q
Q
M
14.1
For each Drawer, position Drawer Slide (M) against Drawer with
front end of Slide flush and square with rear side of Drawer Front
(L), then secure with two 5/8" Screws (Q) at locations shown.
14.2
Repeat for second Drawer Slide (M).
14.3
Install Drawer Pull (O) on each Drawer and secure with two 1.5"
Screws (S).
ASSEMBLY AND
ISLAND
R
R
H
S
S
R
R
O
L
Q
M
Q
L
Q
Advertisement
