Telecom Behnke 20-0001B-IP Series Instructions Manual page 64

Instructions for Behnke 20-0001B-IP, 20-0014B-IP, 20-0016B-IP
GB
Specifications
Relay
Quantity: 2
Operating mode: Adjustable per relay: Door opener relay, connection indicator,
Switching voltage: 30 VDC / 30 VAC max.
Switching current: 2 A max.
Switching capacity: 60 W / 60 VA max.
Switching contact: when operating as a door opener relay: Normally open or normally
Door opener relay: Control of a door opener for opening an access
Opening time: 1-90 s
Connection indicator: Control of the relay when the device is connected,
Additional bell: Triggering the relay during ringing on an incoming
64
additional bell or fault indication
closed contact
Misc.: Normally open contact
Codes: 9 max., valid for in-house remote station or code lock, always or
according to schedule
manual, permanent opening (can be activated via codes) or
automatic opening according to schedule possible
Activation via door opener button possible, always or according to
schedule
Logging of access control by e-mail
can be activated for incoming connection, outgoing connection
or outgoing connection after the remote station is answered
call, at the beginning of a direct call (1-90 s) or during setup
of a direct call
www.behnke-online.de